How to Fix an Automatic Gate Remote Control That’s Not Working

Automatic gate remote controls are very convenient and have made life easier for many homeowners. However, when this remote suddenly stops working, it can be quite frustrating. There are many reasons why your automatic gate remote may not be functioning, and it can be challenging to figure out exactly what the issue is. In this article, we will clarify how to fix an automatic gate remote control that isn’t working, and answer some frequently asked questions at the end.

Step 1: Check the Batteries

The first thing you should do is check the batteries. It is common for the batteries in automatic gate remote controls to die out. If the batteries are flat or low, change them with a new one. Ensure that you use the right kind of batteries recommended by the manufacturers.

Step 2: Check the Frequency

It is possible that your remote control was on a different frequency. If this is the case, then the automatic gate opener won’t function. Refer to the instruction manual on how to adjust the frequency.

Step 3: Sensor Maintenance

Clean and maintain the sensors continuously. Dirt, debris, and cobwebs can often accumulate on the sensors making them ineffective. This can cause the automatic gate to stop functioning.

Step 4: Check Electrical Connection

Ensure that the automatic gate opener is connected correctly to the electrical outlet. Also, check if the power supply is working correctly. This information should be indicated on the instruction manual.

Step 5: Check the Wiring

Look for any frayed wires or loose connections. These can disrupt the communication between the automatic gate opener and the remote control. Ensure that all the wires are secure and in their respective places.

Step 6: Reset the Remote Control

Unplug the automatic gate opener, wait for a few minutes, and then plug it back in. Press the remote control button, and the battery in the machine will reset.

Step 7: Check the Switches and Controls

Check if the switches and controls on the remote are working correctly. Some remote controls have LED indicators that light up when they are working. If these LED lights are not lit, then your remote control might be damaged.


1. Why are the LED lights on my remote control not working?

This could indicate that the battery in the remote controller is dead or has low power. If not the battery, the entire remote control may need to be replaced.

2. Can I use my neighbor’s remote control?

No, it is wise not to use your neighbors’ remote control because this will not work for your automatic gate opener. Ask your neighbor where they got their equipment, and buy one yourself.

3. Why is my automatic gate opening but not closing?

Check the sensors and ensure that they are not blocked by any obstruction. Also, ensure that the sensor is aligned with one another. If this is not the case, check the wiring of the automatic gate and make sure they are secure.

4. Can I program the remote control myself, or do I need a professional?

If you have the instruction manual, most of them can easily be programmed by homeowners themselves. However, if you are unsure, contact the manufacturer and ask for assistance.

5. Can I control my automatic gate from my smartphone?

Yes, some automatic gates have an app that you can download in your smartphone. This app enables you to open and close the automatic gate remotely.


If you are experiencing problems with your automatic gate remote control, it is essential to address the issue quickly. Follow the steps described above when troubleshooting your automatic gate remote, and if all else fails, reach out to the manufacturer or an authorized technician. Keep your automatic gate remote clean and well-maintained so that it can last for an extended period. We hope that the FAQs section in this article has provided additional knowledge about automatic gate remote controls.

Leave a Reply

Services We Offer

Business Hours

Monday 8:00 AM - 8:00 PM
Tuesday 8:00 AM - 8:00 PM
Wednesday 8:00 AM - 8:00 PM
Thursday 8:00 AM - 8:00 PM
Friday 8:00 AM - 8:00 PM
Saturday 8:00 AM - 8:00 PM
Sunday 8:00 AM - 8:00 PM